BLOG

The Alaia Project, entry two

temp-post-image

Entry Two from Dan’s journal in his process to build an authentic, fully sustainable Alaia surfboard.

After some inspiration of the wave sliding kind, I decided to put in some real study time. I researched every article I could find on Alaia construction and while I found some awesome information, nearly ever article involved the use of environmentally harmful chemicals (spar urethane, fiberglass resin, epoxy, etc.). Since my goal is to build this board using nothing but what Mother Nature has provided, I was forced to look elsewhere.

My friend and chief editor of this blog forwarded me a link to Engrain Surfboards (http://engrainsurfboards.com/) and after perusing their site a bit I found out that not only are they building the kind of board I want to construct, they are doing it in the same manner I am striving for.

Engrain uses Raw or boiled linseed oil (If you are one of Oprah’s army, you may have heard Dr. Oz refer to this as “Flax Seed oil”… they are one in the same). They use Paulownia wood for the actual board which is a fast growing wood which makes it very sustainable with little impact to the state of the forest not to mention they mill the wood right there at their site in southern NC. Engrain uses mostly hand tools during the shaping process which lessens the negative impact their production makes on the environment. I exchanged emails with Scott (one of the owners) and he gave me some great ideas for my board. He even linked me to a Paulownia distributor on the east coast which is a nice Ace to keep in my pocket but my goal is to build this board using reclaimed wood.

So since I aim to use reclaimed wood, I started scouring the roadsides for discarded wood that might be suitable … fence panels? Nah, too thin and weak. Leftover 2”x4” scraps? Nope, not long enough or wide enough. Palm logs? Too porous. So I swallowed my pride and went to Lowes to look at planks of Pine and Cedar. I found some suitable pieces but I still think I can find the right wood without resorting to the Corporate Machine. So I contacted my friend who runs a tree trimming business and asked if he has any nice pine logs I can have. He said no but he gets them all the time so I am in wait for some choice pine logs. Then to mill them into a suitable length and width.

CONTACT US

/ KEEP IN TOUCH

919.610.8838

Email us

hello (@) copyandcontentgroup.com

Located in TRUCKEE, CA.

We also send a newsletter sometimes.